- Browse:
- Collections
- Subjects
- Creators
- Record Groups
Schjeldahl Entrepreneur Records
Sheldahl, Inc.: General Business Records
Sheldahl, Inc.: Designs, Patents, and Products
Schjeldahl Entrepreneur Records, 1901-2002
Collection Overview
Title: Schjeldahl Entrepreneur Records, 1901-2002
ID: OGLMC1433
Primary Creator: Schjeldahl, Gilmore T. (1912-2002)
Extent: 7.5 Linear Feet
Date Acquired: 09/29/2001. More info below under Accruals.
Subjects: Business and Industry
Languages: English
Abstract
Scope and Contents of the Materials
The Schjeldahl Entrepreneur Records have been divided into six series as follows:
Series 1: Sheldahl, Inc.: General Business Records
Series 2: Sheldahl, Inc.: Designs, Patents, and Products
Series 3: G.T. Schjeldahl's Other Companies
Series 4: G.T. Schjeldahl, Personal
Series 5: Photographs
Series 6: Films
Collection Historical Note
The legacy of Gilmore T. Schjeldahl (Shelly) began in 1948 when he created a bag making machine in the basement of his Minneapolis home. Herb Harris invested $100 in the venture, which enabled Shelly to fill his first order for large bags to be used as barrel liners for pickles, beginning a new business called Herb-Shelly, Inc. In 1949, the company moved from Shelly's basement to a small shop in Farmington, MN. By 1954, the company had $500,000 annual sales and 100 employees. The company started experimenting with lamination at this time, researching adhesives for a new flexible Dupont polymer called Mylar. The company was also involved in the fabrication of a balloon for the Office of Naval Research at the University of Minnesota. In May of 1954, Herb-Shelly was acquired by Brown and Bigelow, a St. Paul advertising products firm. Shelly resigned and left the company on January 8, 1955.
On January 21, 1955, Shelly began making plans for a new company to be located in the basement of the Medical Arts building in Northfield, MN. The company secured a contract in April 1955 to create atmospheric research balloons made with Mylar polyester film, held together with an adhesive system that Shelly developed. On September 1, 1955, the G.T. Schjeldahl Company (the Company) went public. In addition to balloons, the Company manufactured bag-making machines and heat-sealing adhesive tape. Eventually the G. T. Schjeldahl Company began developing a line of adhesive tapes for polyester bonding called Schjel-Bond (GT100, GT200, GT300, and GT400). Early in the Company's history two key individuals were hired, Dick Slater as project engineer and Jim Womack as a salesman. In December 1955, the G. T. Schjeldahl Company shipped its first automatic side-weld polyethylene bag-making machine to the Chase Bag Company in Los Angeles.
During this time, the G. T. Schjeldahl Company was divided into the Mechanical (packaging machinery) and the Polyester Film (balloons, special fabrication, and Schjel-Bond) Divisions. It sold more than 40 Mylar polyester stratospheric balloons by February 1956. The Company's balloons received national acclaim when one balloon climbed 27 miles into the air (a record), beginning in Minnesota, and traveling over seven states for almost three days before landing in a field in Kentucky.
The plastics were developed for more commercial use in "Schjeldomes," which were air- supported buildings. They only cost 98 cents per square foot and could be seen covering a swimming pool at Lutsen Resort on Lake Superior, an office and display center, and a storage building at Dupont's laboratories, to name just a few. In 1958, the G. T. Schjeldahl Company moved to a new location at the north edge of Northfield, and built a 340 foot long air-supported factory called the "Schjel-Mile." Eventually, the entire 54 acre operations center was called "Schjel-Town," and contained two Schjel-Miles, a factory and other small buildings, and a general office and laboratory.
Many federal government sponsored programs, such as Echo, PAGEOS, Pegasus, ROBIN, and ROSE, depended on the Company's research for their success. Some of the processes that Shelly learned from working on these government projects are still used in the Company's circuitry and other products.
The G. T. Schjeldahl Company received national fame for designing and building Echo I, a communications satellite which bounced television and radio signals back to earth, making coast to coast transmission of television possible. This "satelloon" was launched from Cape Canaveral on August 12, 1960, and was the largest object ever sent into orbit at that time. It was America's way of competing with the Russian satellite Sputnik; however, unlike Sputnik, Echo I could be seen from earth, and was followed by Americans and newspapers across the country. Echo I enabled America to create a satellite-based global telecommunications network.
The G.T. Schjeldahl Company also made the laminate and adhesive materials for the Polaris submarine missile program. These environmental seals, which were called diaphragms, kept water out of the sub until a missile was released.
G. T. Schjeldahl Company products and technology using vacuum deposition and lamination were used on the Pegasus satellite, putting the Company into the vacuum deposition business. Thermal control coatings for spacecraft, x-ray sensors, radar-absorbing films, Novaclad, and keypads for computer keyboards all were the result of vacuum deposition.
Balloons (Stratoscope II, ROBIN, Stargazer, and Voyager) continued to be an important part of the Company during the early 1960s. The most significant year was 1964. It was then that NASA launched Echo II. Arthur Hatch became President of the Company in 1964, but Shelly remained Chairman of the Board and Treasurer. The Company's Mechanical Division expanded into the European market. The Company also acquired a paper company in Rhode Island, and moved its packaging machinery operations there, making Jim Womack the head. It also acquired several electronic connector manufacturers.
By 1965, the G. T. Schjeldahl Company had three divisions, Advance Programs, (government research and marketing); Packaging Machinery (bag making); and, Electrical Products. From 1966 through 1971, the Company's Packaging Machinery Division expanded into shrink- wrapping and blow molding. In addition, the Company was considered a pioneer in flexible circuitry (created by using the Company's laminating technology). The Company supplied flexible circuitry for products such as Polaroid cameras and Ford's 1968 cars.
The weakening economy in 1967 caused government supported research to decrease. G. T. Schjeldahl Company sales decreased and net income decreased 60%. Arthur Hatch resigned as President in 1967, and was replaced by George L. Freeman. Shelly also resigned as Chairman of the Board, and started Giltech, a company which concerned itself primarily with making bottles through the blow molding process. The Giltech Company merged with another plastics company, Rainville, in 1972, and became Rainville, Inc. Eventually Rainville, Inc. merged with, and became, Universal Dynamics (UnaDyn), a company headquartered in Woodbridge, VA. In 1970, Shelly also created the Plastic Netting Machine Company. This company developed and produced devices for feeding and filling rigid plastic containers.
Meanwhile, the G. T. Schjeldahl Company struggled as sales continued to decline, down to 16.1 million from under 20 million in 1967, and continued to decline through 1970. In 1971, George L. Freeman resigned as Company President, and James Womack took over the helm. The Company and its products line then began to grow.
In 1974, the G. T. Schjeldahl Company changed its name to Sheldahl, Inc. (the Company or Sheldahl) because it was easier to spell, and it was hoped people would then pronounce it correctly. The Company achieved world-wide status for its materials technology. It was the nation's largest independent producer of flexible circuitry, and was also one of the largest suppliers of packaging material in the Western Hemisphere. Sheldahl also produced laminates and tapes, aerospace thermal control products, helicopter blade liners, flexible circuits, aerostats, membrane switches, aircraft keyboard instrumentation, and worked on products for solar energy programs.
Sheldahl built the bioshield for the unmanned spacecraft Viking which landed on Mars in 1975, and Sheldahl thermal control materials have been on every space shuttle mission since Columbia in 1981. The Company also supplied materials for the Alaska Pipeline.
In 1977, Sheldahl realized that it had branched out into too many areas and was too diverse. The Company decided to focus exclusively on materials and circuitry, and sold the businesses that did not fall under this umbrella. In the area of flexible circuitry, the Company invented the Flexswitch, which is used in microwaves and washing machines, as well as in office equipment, and supplied flexible circuitry to automobile manufacturers.
In the area of Packaging Machinery, Sheldahl's bag machine output was 5000 by 1980, beginning with only one in 1955. Any plastic bag that is used today was probably manufactured on a Sheldahl machine, or at the very least, a machine using Sheldahl technology. However, this division was sold in 1980 in order to focus on materials and circuitry.
In 1978, Shelly suffered a mild heart attack. During his recovery, he pondered techniques for opening up blocked arteries. This led to another business venture, the Cathedyne Corporation. Shelly worked with his cardiologist on improving coronary angioplasty catheters. The Cathedyne Corporation was sold to Angiomedics, Inc., a subsidiary of Pfizer, Inc., of Minneapolis, in 1983.
In 1987, Sheldahl signed an agreement with Sumitomo Bakelite Company of Tokyo, to manufacture and market flexible circuits and circuitry components. In 1988, James Womack stepped down as President and became Chairman of the Board, and James E. Donaghy became President. New products included Z-link, Novaclad in 1990, Novaflex in 1991, Novalink in 1993, and ViaGrid in 1994.
In 1993, Sheldahl led a consortium to help manufacture cheaper multichip modules (MCMs). Longmont, Colorado, was the site of the Company's pilot plant. The Longmont facility placed Sheldahl squarely into the data communications market. Sheldahl was also still active in aerospace during this time. Both the satellite Magellan (1989) and the Hubble telescope (1990) contained Sheldahl products and insulation materials. In 1989, the Company opened a flexible circuit finishing plant in Aberdeen, SD, and a second one was opened in Britton, SD, in 1993. Thermal control materials continue to be needed in spacecraft and satellites.
Sheldahl products and designs have been, and continue to be, used by all of us in our daily lives. In 2000, Sheldahl merged with International Flex Technologies, headquartered in New York.
Gilmore T. (Shelly) Schjeldahl died on March 10, 2002, in Lenox, Massachusetts.
Subject/Index Terms
Administrative Information
Repository: Elwyn B. Robinson Department of Special Collections
Accruals: Additional material was donated by Bruce Gjovig, UND Center for Innovation, in May 2002 (Acc.2003-2603).
Access Restrictions: Open for inspection under the rules and regulations of the Elwyn B. Robinson Department of Special Collections.
Acquisition Source: Gilmore Schjeldahl, Lenox, Massachusetts (via Bruce Gjovig, UND Center for Innovation)
Acquisition Method: Donation; Acc.2001-2537
Preferred Citation: (Description of Item). Schjeldahl Entrepreneur Records. OGLMC 1433, Box #, Folder #. Elwyn B. Robinson Department of Special Collections, Chester Fritz Library, University of North Dakota, Grand Forks.
Finding Aid Revision History: Finding aid migrated to Archon in February 2015.
Box and Folder Listing
Browse by Series:
[Series 1: Sheldahl, Inc.: General Business Records],
[Series 2: Sheldahl, Inc.: Designs, Patents, and Products],
[Series 3: G.T. Schjeldahl's Other Companies],
[Series 4: G.T. Schjeldahl, Personal],
[Series 5: Photographs],
[Series 6: Films],
[All]
- Series 1: Sheldahl, Inc.: General Business Records
- This series contains the general business records of Sheldahl, Inc. (Sheldahl or the Company), which are broken down into many subseries.
- Sub-Series 1: Company History
- The Company History subseries contains four books describing the history of the Company from its beginning in 1955, continuing through 1995; information about the Company's 40th anniversary celebration; and various magazine and newspaper articles about Gilmore T. Schjeldahl (Shelly) and Sheldahl.
- Box 1
- Folder 1: "Optical Thermal and Control Space Deployables," 1955-1973
- Folder 2: "Management Capabilities"
- Folder 3: "The Inside Story," 1955-1988
- Folder 4: "Forty Years of Innovation: The Sheldahl Story," 1955-1995
- Folder 5: 40th Anniversary, 1995
- Folder 6: Miscellaneous Company Biographies, 1945-1995
- Sub-Series 2: Annual Reports
- Sub-Series 3: Meetings
- The Meetings subseries contains information related to Sheldahl management and shareholder meetings and discussions, as well as reports to shareholders. Also included are Annual Meeting Summary Brochures for 1955-1974, 1980-1985, and 1990-1996. These brochures contain Company financial highlights for an entire year or part of a year, i.e., a fiscal quarter. There is also a file containing information from the mortgage and debt financing discussions from 1965 through 1966, detailing ways to finance the Company in order to alleviate long term debt, and discussions about building a new, larger office complex/building.
- Box 1
- Folder 12: Meetings With Management Team, 1979-1992
- Folder 13: Annual Meeting Summary Brochures, 1955-1974, 1980-1985, 1990-1996
- Folder 14: Notice of Annual Meeting of Shareholders, 1970-1982, 1987-1999
- Folder 15: Reports to Shareholders, 1957-1961
- Folder 16: Mortgage and Debt Financing Discussion, 1965-1966
- Sub-Series 4: Reports
- The Reports subseries contains the Securities and Exchange Commission Reports of Sheldahl from 1969, and 1996 through 1999.
- Sub-Series 5: Calendars
- The Calendars subseries contains photocopies of three small spiral notebooks kept by Shelly, from 1963 through 1964, in which he wrote meetings, appointments, and brief summaries of the events happening and/or transpiring on a particular day.
- Sub-Series 6: Check Registers
- The Check Registers subseries contains two check registers, one from 1961 through 1962, showing the expenses and purchases made by Shelly and Sheldahl. The other, from 1979 through 1983, is the check register of Sheldahl from the First Security State Bank.
- Sub-Series 7: Expense Reports
- The Expense Reports subseries contains expense reports and daily logs from 1977 through 1978, and 1990. These reports show not only Shelly's expenses but also give detailed accounts of Company-related activities each day.
- Sub-Series 8: Miscellaneous Business Organization
- The Miscellaneous Business Organization subseries contains items such as time cards of Sheldahl employees from 1968 through 1970; a mousepad with the Company logo on it; a business card of James S. Womack; a chart showing the product capabilities of the Company for 1955, 1963, and the future; a mailing list from 1970 to 1971 of those individuals wishing to receive Sheldahl brochures, financial statements, and other Company publications, such as its annual reports; memos from Sheldahl employees, particularly James S. Womack, from 1971- 1974; three undated organizational charts showing Company management and employees; and, a file containing information on the Center for Innovation and Business Development from 1989 through 1994, as it relates to Shelly and Sheldahl. Within this file, there is a biography of Shelly written by Bruce Gjovig, the Director of the Center for Innovation and Business Development.
- Box 2
- Folder 2: Time Cards, 1968-1970
- Folder 3: Mouse Pad
- Folder 4: Business Card
- Folder 5: "Evolution of G.T.S. Co. Product Capabilities," 1955 and 1963
- Folder 6: Mailing List, 1970-1971
- Folder 7: Memos, 1971-1974
- Folder 8: Organizational Charts
- Folder 9: Center for Innovation and Business Development, 1989-1994
- Sub-Series 9: Litigation
- The Litigation subseries contains Shelly's affidavit related to litigation between Dupont and the Union Carbide Corporation, concerning polyethylene film. This file also contains the agreement between Shelly (doing business as Plastic Netting Machine Company) and Dupont from February 1, 1972, regarding payment, as well as two letters of correspondence from Dupont to Shelly, and other documents relating to Shelly's dealings with Dupont in the mid-1970s.
- Sub-Series 10: Newsletters
- The Newsletters subseries contains Sheldahl newsletters and bulletins which were published monthly or quarterly. Some, such as "The Fine Line," were designed for employees only; however, most of the newsletters were designed for employees, as well as for the general public. The bulk of the newsletters are from the early 1970s through the late 1980s.
- Sub-Series 11: Company Publications
- The Company Publications subseries contains publications by Sheldahl of its products, from the early beginnings of the Company through the late 1990s. The publications are separated into files according to the Company division which produced the brochure or booklet. Included are publications about Skydomes and “Schjeldomes,” as well as two spiral bound books showing thermal products and materials.
- Box 2
- Folder 15: Product Bulletins
- Folder 16: Advanced Products Division, 1973-1976
- Folder 17: Bag Making Machines
- Folder 18: Flexible Interconnect
- Folder 19: Micro Products, 1998-1999
- Folder 20: Packaging Machinery Division
- Folder 21: Products/Services
- Folder 22: "Schjeldome"
- Folder 23: Technical Materials (Part I)
- Folder 24: Technical Materials (Part II), 1995
- Folder 25: Miscellaneous Company Publications
- Sub-Series 12: Outside Publications About Sheldahl
- The Outside Publications About Sheldahl subseries contains publications about the Company. Of particular note is the Ghost (Global HOrizontal Sounding Technique) summary from May 1969, relating to the Ghost weather balloon and ATMOSAT 'America' (atmospheric satellite), also pertaining to ballooning. In addition, the Miscellaneous Outside Publications file contains brochures and magazine ads showing products with Sheldahl designs and innovations, such as the Kodak XL-55 movie camera; the Polaroid SX-70 land camera; Mylar used in the Project Echo satellite balloons; and, the Texas Instruments Model 733ASK silent teletypewriter. The final three files contain Craig Hallum Monthly Commentary Newsletters, which include stock and financial information about Sheldahl; Craig Hallum’s research reports on Sheldahl; and, Craig Hallum's billing to Sheldahl.
- Box 2
- Folder 26: "Ghost, A Technical Summary," May 1969
- Folder 27: "ATMOSAT 'America,'" July 1976
- Folder 28: Miscellaneous Outside Publications, 1969, 1973-1976, 1993-1997
- Folder 29: Craig Hallum, Inc.: Monthly Commentary Newsletters, 1973-1974
- Folder 30: Craig Hallum, Inc.: Research Reports on Sheldahl, 1976 and 1990
- Folder 31: Craig Hallum, Inc.: Billing, 1974-1976
- Sub-Series 13: Competitor Publications
- The Competitor publications subseries contains brochures, booklets, and other publications from 1981 to 1996 by individuals and companies who were competitors of Sheldahl.
- Sub-Series 14: News Releases
- The News Releases subseries contains press and news releases relating to Sheldahl products and developments, as well as other Company employees, including Shelly, from the early 1960s though the late 1990s.
- Sub-Series 15: Newspaper Clippings
- The Newspaper Clippings subseries contains two files with newspaper clippings related to Shelly, his employees, and his companies, from 1954 through 2000. Part I has the actual newspaper clippings and Part II has copies of newspaper clippings.
- Sub-Series 16: Interviews, Speeches, and Presentations
- The Interviews, Speeches, and Presentations subseries contains interviews with Shelly, as well as speeches made by him about the Company and/or himself. Of particular note is the "Keeping the Creative Fires Burning" Presentation file. It contains Shelly's presentation speech at an innovations workshop, as well as the overhead transparencies, pictures, brochures, and the Echo I skin samples that he used during the presentation.
- Sub-Series 17: Correspondence
- The Correspondence subseries contains three files of correspondence letters. One is Shelly's correspondence from 1947 through 1997. The James Womack file contains his correspondence from 1971 through 1976, as well as the letter indicating the Company name change from Schjeldahl to Sheldahl. The Ford Motor Company file contains Shelly’s correspondence with them in 1974 through 1975 regarding retrofit energy saving devices used for cars, and other emission control devices which improve fuel economy and contribute to energy conservation. This file also has copies of newspaper articles related to emissions and energy conservation.
- Sub-Series 18: Miscellaneous
- The Miscellaneous subseries contains correspondence, receipts, and other documents from the mid-1950s though 2000, relating to the general business records of the Company.
- Series 2: Sheldahl, Inc.: Designs, Patents, and Products
- Sub-Series 1: Designs
- The Designs subseries contains four files, each which have drawings, sketches, and designs of Company machines and products, including a sketch on a napkin made by Shelly during his visit to the Dairy Expo in Atlantic City in 1976. The sketch is most likely of an ice cream filling machine. There are also two business cards from Shamrock Industries within this file. One is James V. Ostrum’s, an engineer with Shamrock Industries, and the other is Shelly’s, who worked for them as a Packing Systems Analyst consultant. The carrot packaging system file contains sketches and drawings from 1983 of a machine which packages carrots. The G. T. Schjeldahl files contains drawings and sketches made by Shelly in 1992, most likely of a SARCS machine. And, the Miscellaneous file contains various drawings and sketches from 1960 to 1983, made by Shelly and others within his various companies.
- Sub-Series 2: Patents
- The Patents subseries has three files which contain patents relating to the types of machines and products that Shelly worked with, as well as the patents of Shelly's designs from 1951 through 1986. The Shamrock Industries file contains legal documents relating to G. T. Schjeldahl’s work on machines for Shamrock Industries which could automatically fill ice cream containers of four- or five-quart capacities or smaller. The Windmoeller and Hoelscher Corporation file contains the patent and other documents for a reciprocally moving hot-wire, which could cut thermoplastic sheets into individual segments, for use in bag making machines. The Haugen and Nikolai, Patent 95 (1995) file has documents relating to Patent 95 of the SARRC/SAURC machines. The machines from 1995 forward had a new split drive rewind roll changer which permitted the unwind and rewind, respectively, to move forward or reverse at different rates.
- Sub-Series 3: Products
- The Products subseries contains files regarding products that have been designed or made by Shelly or Sheldahl, including polyethylene bags; samples of Novaflex adhesives; the Polaris Rupture Disc, used in the Polaris Mark XVII fleet ballistic missile; and, Schjelamel-10 laminate, developed for manned flights of spacecraft and for carrying very heavy loads, as well as a laminate book containing samples of all of Company's laminates.
- Box 3
- Folder 20: Bags Made on Schjeldahl Polyethylene Bag Machine
- Folder 21: Home Plastics Bag Converters, 1964
- Folder 22: Laminates Sample Book
- Folder 23: Novaflex Adhesiveless Interconnection System
- Folder 24: Polaris Rupture Disc
- Folder 25: Schjelamel-10, 1960
- Folder 26: Z-link Technology Series 1900 Pressing Kit
- Box 6
- Sub-Series 4: Echo I and II
- The Echo I and II subseries contains literature and product samples related to these two satellite balloons, including the Echo I “communications for peace (postage) stamp," which was commissioned by WLOL radio in the Twin Cities. There are also government publications which relate to Echo I, such as the Measured Physical and Optical Properties of the PAGEOS and the Echo I, which was presented at the Symposium on the Use of Artificial Satellites for Geology, in Washington, D.C., on April 15-17, 1971, and the Project Echo II final report, which was a study commissioned by NASA and done at Sheldahl, in Northfield, MN. The Company was the primary contractor for the Echo II Program. There are also files which contain information about the Echo I and II satellite balloons, as well as samples of Echo I and Echo II skins, and a file containing information about an art exhibition by artist Les Levine in 1967, at the Architectural League in New York City, which featured rooms made of Sheldahl’s Mylar laminates.
- Box 3
- Folder 27: Echo I, "Communications for Peace" Stamp, 1960
- Folder 28: Echo I, "Measured Physical and Optical Properties of the PAGEOS and the Echo I," April 15-17, 1971
- Folder 29: Echo II, "Project Echo II," Final Report, April 15, 1964
- Folder 30: Echo I and II, Satellite Balloon, 1960-1973
- Folder 31: Echo I and II, "House Committee on Science and Astronautics Erectable and Inflatable Structures in Space," May 24, 1961
- Folder 32: Echo I and II Skins and Echo Samples
- Folder 33: Laminates, Mylar, Covered Rooms Exhibitions, 1967
- Folder 34: Rekwin Co., Scientific Ballooning, 1994
- Sub-Series 5: SARCS (Sheldahl Automatic Roll Changing System)/ SARRCS (Sheldahl Automatic Rewind Roll Change System)/ SAURCS (Sheldahl Automatic Unwind Roll Change System)
- The SARCS (Sheldahl Automatic Roll Changing System), SARRCS (Sheldahl Automatic Rewind Roll Change System), and SAURCS (Sheldahl Automatic Unwind Roll Change System) subseries contain files relating to the automatic roll rewinding/unwinding machine. These machines were designed to rewind and unwind rolls of any of the standard Sheldahl laminates or films. The LEM 909 files contain correspondence with Richard Lemke (LEM) and Shelly, as well as other documents, relating to problems with a model 909 SARCS machine. The JED 1128 file has similar information, i.e., James E. Donaghy (JED), model 1128, as do the LEM 1019 files. The SARCS Project files contain general information and design sketches of all of the different types (SARRCS, SAURCS, and Patent 95, which combined the rewind and unwind components) and models of SARCS machines from August of 1990 through June of 1995. The final file in this subseries has the billing and correspondence information from attorneys Haugen and Nikolai.
- Box 4
- Folder 1: LEM 909, January 1992 - September 1993
- Folder 2: LEM 909, September 1992 - October 1992
- Folder 3: JED 1128, November 1992 - February 1993
- Folder 4: LEM 1019, July 1992 - December 1992
- Folder 5: LEM 1019, January 1993 - December 1993
- Folder 6: LEM 1019, January 1994 - March 1994
- Folder 7: SARCS Project, August 1990 - December 1993
- Folder 8: SARCS Project, March 1994 - June 1995
- Folder 9: SAURCS and SARRCS, Designs, 1992-1995
- Folder 10: SARRCS and SAURCS, Haugen and Nikolai Billing, 1994-1995
- Series 3: G.T. Schjeldahl's Other Companies
- Sub-Series 1: Herb-Shelly, Inc.
- The Herb-Shelly, Inc. subseries contains ledger pages, correspondence, and other documents from 1940 through 1955, pertaining to the Herb-Shelly, Inc., and to the Air Sick Bag which was developed by Shelly in 1949.
- Sub-Series 2: Gilmore T. Schjeldahl Investment Company
- The Gilmore T. Schjeldahl Investment Company subseries contains minutes of KitCab meetings. KitCab stood for Shelly's kitchen cabinet, and the company was formed in order to provide Shelly and his wife Charlene with a vehicle in which to express their common interest in an investment and business venture. Bernard Greesweig provided the professional management of the company in a combination advisory/administrative capacity. The meeting minutes include balance sheets and other financial documents and correspondence.
- Sub-Series 3: Giltech
- The Giltech subseries contains files related to the meetings, shareholders and stocks, and financial concerns of the Giltech Corporation, and Board of Directors Meetings files contain meeting minutes, correspondence, and other documents pertaining to meeting topics. The first file contains the Articles of Incorporation of the Giltech Development Company. Other files relate to studies with Bristol-Myers, concerning the making of Bufferin and Excederin bottles, as well as the Emhart/Giltech-Barex 210 study, which proposed to manufacture 10 fluid ounce capacity beverage containers employing heat sensitive resin such as Barex 210. One contains information pertaining to the Dubiner and Giltech agreement regarding the Gussoni Patent. This patent concerns the design of a machine that could manufacture bottles from thermoplastic materials. Legal files relate to billing and correspondence, as well as the Wheaton litigation, concerning a dispute over a patent on a blow molding machine that Wheaton claimed to have designed first.
- Box 4
- Folder 14: Board of Directors Meetings, 1965-1967
- Folder 15: Board of Directors Meetings, 1965-1967
- Folder 16: Board of Directors Meetings, 1971
- Folder 17: Notice of Annual Meeting of Shareholders, November 17, 1969
- Folder 18: Stock Purchase Agreements, 1967-1968
- Folder 19: Securities and Exchange Commission Reports, 1969
- Folder 20: Financial Statements, 1969 and 1970
- Folder 21: Draft of Profit Feasibility Study for Bristol-Meyers Products Division, 1966
- Folder 22: Original Drawings from Proposal to Bristol-Meyers, 1966
- Folder 23: Plan for Establishment of Giltech Development Company, 1966-1967
- Folder 24: Emhart/Giltech, Barex 210 Study, 1970
- Box 5
- Folder 1: Dubiner and Giltech Agreement, 1970-1972
- Folder 2: Business Cards
- Folder 3: Monthly Calendars and Pocketbooks, 1966-1968, 1975-1978
- Folder 4: Calendar, 1968-1969
- Folder 5: Wheaton Litigation, 1970-1971
- Folder 6: Greensweig Associates, Billing, 1966-1970
- Folder 7: Robins, Davis & Lyons, Correspondence, 1970-1971
- Sub-Series 4: Giltech: Blow Molding
- Giltech: Blow Molding subseries contains files relating to blow molding patents, designs, and correspondence. Included are more designs for Bufferin and Excederin bottles, as well as quality control sample data of these bottles. Included also is information about the Nissei Company, a plastics company headquartered in Sakaki, Nagano, Japan, which also manufactures blow molding machines and equipment.
- Box 5
- Folder 8: Patents for Blow Molding Art, 1901-1969
- Folder 9: Drawing of a Prototype of Giltech Bottle Forming Machine and Packaging System, December 6, 1966
- Folder 10: Bufferin and Excederin Bottle Designs, 1966 and 1970
- Folder 11: Quality Control Sampling Data for 100-size Bufferin Bottles, 1968-1969
- Folder 12: Correspondence, 1968-1972
- Folder 13: Designs, 1966-1971
- Folder 14: Miscellaneous, 1971
- Folder 15: Nissei Company, 1967
- Sub-Series 5: Giltech: Rainville Merger
- Giltech: Rainville Merger subseries contains files of brochures, correspondence, financial statements, meeting minutes, press releases, and newspaper articles relating to Giltech’s merger with the Rainville Company, located in Middlesex, NJ. Giltech became Rainville Company, Inc., in 1972. Also included are documents pertaining to Universal Dynamics (UnaDyn), with which Rainville Company, Inc. eventually merged, and files pertaining to the John J. Farrell litigation, concerning the Gussoni Patent. Included are two of Shelly's depositions.
- Box 5
- Folder 16: Rainville Company, 1972-1975
- Folder 17: Rainville Company, 1976-1977
- Folder 18: Rainville Company, 1978
- Folder 19: Universal Dynamics Company, 1976-1978, 1989-1995
- Folder 20: Rainville Merger, 1967-1970
- Folder 21: Rainville Merger, 1971-1974
- Folder 22: John J. Farrell Litigation, 1969-0979
- Folder 23: John J. Farrell Litigation, G.T. Schjeldahl's Deposition, May 6, 1977
- Folder 24: John J. Farrell Litigation, G.T. Schjeldahl's Deposition, May 6, 1977
- Folder 25: Effres and Goldman, Inc., Miscellaneous, 1974-1975
- Sub-Series 6: Cathedyne Corporation
- The Cathedyne Corporation subseries contains Shelly's expense reports/daily logs from September 1978 through December 1981, financial and legal documents, shareholder meeting minutes, drawings and sketches, and other documents relating to the Cathedyne Corporation.
- Sub-Series 7: Plastic Netting Machine Company
- The Plastic Netting Machine Company subseries contains bank statements and bank deposit records of the company, as well as Shelly’s expense account records and a voucher file containing a telephone log and expenses, which describe some of his daily activities. Included also is Shelly’s billing of Dupont for consultant services and company machine designs from 1972 through 1978.
- Sub-Series 8: Shelly Design and Manufacturing Company
- Shelly Design and Manufacturing Company subseries contains organizational charts and the mission statement of the company, which was founded by Shelly, Harry Carlson, Don Frisbie, Larry Frisbie, H.J. "Sco" Scofield, and Brian Knutson. The company was intended to be an avenue by which the founders could secure manufacturing of their designs and products through outside vendors. The company's founders desired to be leaders in manufacturing and design of "specialized machinery." It appears that the company's focus and designs centered primarily around SARCS machines.
- Series 4: G.T. Schjeldahl, Personal
- This series contains information pertaining to Shelly’s personal life. The North Dakota State University file documents Shelly’s attendance at NDSU from 1937 through 1943, the Alumni Achievement Award he received from NDSU in 1962, and the honorary Doctor of Science degree NDSU granted him in 1970. The University of North Dakota file contains the Commencement Bulletin from 1993, when Shelly received an honorary Doctor of Engineering degree. Two certificates show Shelly’s membership in the National Flexible Packaging Association in 1961 and the Society of Plastics Engineers, Inc., in 1967. Also included is Shelly’s address to the rotary club in Marshalltown, Iowa, in September of 1962, entitled “Echos of the Future,” newspaper clippings about current world and domestic events, and letters and other correspondence from friends, his children, former employees, and other acquaintances.
- Box 6
- Folder 11: North Dakota State University, 1937-1940, 1962, 1969-1970
- Folder 12: University of North Dakota, 1993
- Folder 13: Certificates, 1961
- Folder 14: Address to Rotary Club, September 18, 1962
- Folder 15: Robins, Davis & Lyons, 1976-1977, 1980
- Folder 16: Newspaper Clippings, 1959-1973, 1989-1999
- Folder 17: Miscellaneous, 1958-1960, 1963-1975, 1979-1982, 1988, 1992-1998
- Folder 18: Memorial Service Program, 17 May 2002
- Series 5: Photographs
- Separated and placed in the Photograph File Cabinets.
- Sub-Series 1: Photographs of G. T. Schjeldahl
- Photograph 1: G. T. Schjeldahl, undated
- Photograph 2: G.T. Schjeldahl, sitting at his desk, undated
- Photograph 3: G. T. Schjeldahl, standing in front of grain elevators, undated
- Photograph 4: G. T. Schjeldahl, talking on the telephone, undated
- Photograph 5: G. T. Schjeldahl and an unidentified man (probably actor), standing in Schjel-mile or Portable Plastic Bubble
- Photograph 6: G. T. Schjeldahl, sitting on a swing, and two unidentified individuals; demonstration of Portable Plastic Bubble, circa 1961
- Photograph 7: G. T. Schjeldahl, standing next to parabolic antenna made by G. T. Schjeldahl Company, 1964
- Photograph 8: G. T. Schjeldahl and Jerry Marcell, raising flag on Sheldahl Company, Chrysler Garage, Northfield, MN, undated
- Photograph 9: G. T. Schjeldahl and Jerry Marcell, Raising flag on Sheldahl Company, Chrysler Garage, Northfield, MN, undated
- Photograph 10: G. T. Schjeldahl, sitting at his desk, undated
- Photograph 11: G. T. Schjeldahl, standing in front of blow molding machine, January 22, 1974
- Photograph 12: G. T. Schjeldahl, standing in front of blow molding machine, February 15, 1974
- Photograph 13: G. T. Schjeldahl, standing in front of blow molding machine, February 15, 1974
- Photograph 14: G. T. Schjeldahl, pointing to a design sketch, undated
- Folder 15: G. T. Schjeldahl and an unidentified man, undated
- Folder 16: G. T. Schjeldahl, standing by office door, undated
- Photograph 17: G. T. Schjeldahl, standing in front of drafting board, undated
- Photograph 18: G. T. Schjeldahl, standing next to chartered plane, with an unidentified man checking the plane, undated
- Photograph 19: G. T. Schjeldahl (later years), undated
- Photograph 20: G. T. Schjeldahl (later years), standing in a lab coat, undated
- Photograph 21: Richard J. Slater, undated
- Photograph 22: Marty Grover, artist from Kenneth Square, PA, standing next to bust of G. T. Schjeldahl commemorating 40th Anniversary of Sheldahl, Inc., 1995
- Sub-Series 2: Balloons
- Photograph 23: Balloon assembly, Edna Maban, Bill Lee, and Laura Quist, June 1955
- Photograph 24: Balloon assembly, June 17, 1955
- Photograph 25: Balloon assembly, June 17, 1955
- Photograph 26: Balloon assembly, June 17, 1955
- Photograph 27: Balloon assembly, June 17, 1955
- Photograph 28: Load rings, June 17, 1955
- Photograph 29: Load rings, June 17, 1955
- Photograph 30: Load rings and retaining wires, June 17, 1955
- Photograph 31: Register line, June 17, 1955
- Photograph 32: Balloon assembly, June 21, 1955
- Photograph 33: Inflated balloon, June 21, 1955
- Photograph 34: Inflated balloon, June 21, 1955
- Photograph 35: Inflated balloon, June 21, 1955
- Photograph 36: Inflated balloon, June 21, 1955
- Photograph 37: Close-up view of bottom of inflated balloon, June 21, 1955
- Photograph 38: Close-up view of bottom of inflated balloon, June 21, 1955
- Photograph 39: Inflated balloon outside, undated
- Photograph 40: Balloon assembly, circa September 1956
- Sub-Series 3: Satelloon
- Photograph 41: Four unidentified G.T. Schjeldahl Co. workers, believed to be making a satelloon for Project Echo II, circa 1964
- Photograph 42: Two men (one probably G. T. Schjeldahl), working on satelloon for Project Echo II, April 15, 1964
- Photograph 43: Six unidentified individuals, working on a satelloon for Project Echo II, April 15, 1964
- Photograph 44: Four unidentified individuals, working on a satelloon for Project Echo II, April 15, 1964
- Photograph 45: Four unidentified individuals, working on a satelloon for Project Echo II, April 15, 1964
- Photograph 46: Unidentified man, standing in front of machine, Project Echo II, April 15, 1964
- Photograph 47: Four unidentified men, looking at materials for Project Echo II, April 15, 1964
- Photograph 48: Six unidentified men (probably NASA and G. T. Sheldahl employees), Project Echo II, April 15, 1964
- Photograph 49: Inflated satelloon, Project Echo II, April 15, 1964
- Photograph 50: One hundred thirty-five foot super satelloon; taken during inflation tests at Weeksville, NC, undated
- Photograph 51: Two unidentified workers and a surveyor positioning 50 layers of material before cutting, undated
- Sub-Series 4: Schjeldomes and Schjelmiles
- Photograph 52: Idea sketch for Schjeldome in Northfield, MN, undated
- Photograph 53: G. T. Schjeldahl, standing with seven unidentified individuals in the background and one unidentified caterpillar driver; Schjeldome is also in the background; probably the site preparation for new building in Northfield, MN, undated
- Photograph 54: Schjeldome, with numerous individuals in the background, undated
- Photograph 55: Unidentified man on a ladder climbing to the top of a Schjeldome; G. T. Schjeldahl standing on top of the Schjeldome to demonstrate its toughness; unidentified individuals standing inside of the Schjeldome, undated
- Photograph 56: Probably close-up view of entrance to Schjeldome, undated
- Photograph 57: Unidentified man (probably G. T. Schjeldahl), standing next to the side of a Schjeldome, undated
- Photograph 58: Air dome at Santa Claus town, Dundee, IL, undated
- Photograph 59: Schjeldome, covering a swimming pool, probably at Lutsen Resort in northern Minnesota, circa 1958
- Photograph 60: Schjeldome Bubble Site, with a Volkswagen Beatle inside of it and one unidentified man standing outside the bubble, and two standing inside (one of them is probably G. T. Schjeldahl), undated
- Photograph 61: Probably a Schjelevator, circa 1959
- Photograph 62: Probably a Schjelevator with a car in front of it and an unidentified man walking toward it, undated
- Photograph 63: One Cargill 1000 caboose and one Union Pacific railcar, with elevator in the background, undated
- Photograph 64: Three unidentified men, looking at an elevator; probably the beginning of a Schjelevator, undated
- Photograph 65: Probably close-up view of the outside base of a Schjelevator, undated
- Photograph 66: Probably close-up view of the outside base of a Schjelevator, undated
- Photograph 67: Probably close-up view of the outside base of a Schjelevator, undated
- Photograph 68: Probably close-up view of the outside base of a Schjelevator, undated
- Photograph 69: Probably close-up view of stakes in the ground which help to suspend a Schjelevator, undated
- Photograph 70: Probably close-up of Schjelevator being inflated, undated
- Photograph 71: Two unidentified men, putting stakes in the ground for most likely a Schjelevator, undated
- Photograph 72: Probably partially inflated Schjelevator with unidentified man standing on top of it, undated
- Sub-Series 5: Bags
- Photograph 73: Perforator, undated
- Photograph 74: Perforator, undated
- Photograph 75: Perforator, undated
- Photograph 76: Perforator, undated
- Photograph 77: Perforator, undated
- Photograph 78: Machine which makes garment bags, undated
- Photograph 79: Machine which makes garment bags, undated
- Photograph 80: Machine which makes garment bags, undated
- Photograph 81: Garment bag, undated
- Photograph 82: Machine which makes slope shoulder bags, undated
- Photograph 83: Machine which makes slope shoulder bags, undated
- Sub-Series 6: Giltech Blow Molding Machines
- Photograph 84: Sketch of Giltech blow molding machine, undated
- Photograph 85: Captioned sketch of Giltech blow molding machine, undated
- Photograph 86: Close-up view of design sketch of blow molding machine, April 2, 1970
- Photograph 87: Design sketch of blow molding machine, April 2, 1970
- Photograph 88: Design sketch of blow molding machine, undated
- Photograph 89: Giltech Twin 100 prototype machine, undated
- Photograph 90: Giltech prototype machine on a flatbed truck being moved to storage at 7940 Chicago Avenue, South Minneapolis, undated
- Photograph 91: Close-up view of Giltech prototype machine on a flatbed truck, undated
- Photograph 92: Probably early blow molding machine, undated
- Photograph 93: Giltech GT-100 blow molding machine, August 15, 1967
- Photograph 94: Close-up view of a blow molding machine, August 15, 1967
- Photograph 95: Close-up view of part of a blow molding machine, August 15, 1967
- Photograph 96: View of controls of Giltech blow molding machine, February 28, 1968
- Photograph 97: Giltech 120 blow molding machine, February 28, 1968
- Photograph 98: Close-up view of Giltech blow molding machine, October 10, 1968
- Photograph 99: Close-up view of Giltech blow molding machine, October 10, 1968
- Photograph 100: Close-up view of Giltech blow molding machine, October 10, 1968
- Photograph 101: Close-up view of Giltech blow molding machine, 1969
- Photograph 102: One end of GT/120 blow molding machine with outer platen removed showing tooling, 1969
- Photograph 103: Close-up view of part of blow molding machine, 1969
- Photograph 104: Bill Atherton, just completing new wiring of the front control panel of GT/120 blow molding machine, May 26, 1969
- Photograph 105: Representative samples of bottles from one of the qualifying test runs of blow molding machine, June 10, 1969
- Photograph 106: Control panel of blow molding machine, September 28, 1969
- Photograph 107: Close-up view of control panel of blow molding machine, September 28, 1969
- Photograph 108: Close-up of gages on blow molding machine, September 28, 1969
- Photograph 109: Blow molding machine and an unidentified man, October 15, 1969
- Photograph 110: Giltech 100 blow molding machine and an unidentified man (probably Richard Slater), January 16, 1970
- Photograph 111: Giltech 100 blow molding machine, January 16, 1970
- Photograph 112: Giltech 100 blow molding machine and two unidentified men (one is probably Richard Slater), January 16, 1970
- Photograph 113: Giltech 100 blow molding machine and two unidentified men (one is probably Richard Slater), January 16, 1970
- Photograph 114: Giltech 100 blow molding machine and two unidentified men (one is probably Richard Slater), January 16, 1970
- Photograph 115: Blow molding machine and an unidentified man, January 16, 1970
- Photograph 116: Blow molding machine and an unidentified man (probably Richard Slater), January 16, 1970
- Photograph 117: Close-up view of part of blow molding machine, January 16, 1970
- Photograph 118: Close-up view of part of blow molding machine and two unidentified men, January 16, 1970
- Photograph 119: Close-up view of blow molding machine, January 16, 1970
- Photograph 120: Blow molding machine and an unidentified man (probably G. T. Schjeldahl), January 30, 1970
- Photograph 121: Giltech 100 and an unidentified man, January 30, 1970
- Photograph 122: Blow molding machine, undated
- Photograph 123: Close-up view of part of blow molding machine, undated
- Photograph 124: Blow molding machine and an unidentified man, August 1970
- Photograph 125: Close-up view of control panel of blow molding machine, August 1970
- Photograph 127: Close-up view of part of blow molding machine, undated
- Photograph 128: Close-up view of part of blow molding machine, undated
- Photograph 129: Close-up view of part of blow molding machine, undated
- Photograph 130: Close-up view of part of blow molding machine, undated
- Photograph 131: Giltech TG 100-4 blow molding machine, undated
- Photograph 132: Close-up view of part of Giltech TG-100-4 blow molding machine, undated
- Photograph 133: Close-up view of part of Giltech TG-100-4 blow molding machine, undated
- Sub-Series 7: Blow Molding Machine Repair/Assembly
- Photograph 134: Blow molding machine repair/assembly, status of the GT/60 production model, October 30, 1968
- Photograph 135: Blow molding machine repair/assembly, status of the GT/60 production model, October 30, 1968
- Photograph 136: Blow molding machine repair/assembly, status of the GT/60 production model and two unidentified men, October 30, 1968
- Photograph 137: Blow molding machine repair/assembly and three unidentified men (one is probably Richard Slater), September 19, 1969
- Photograph 138: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 139: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 140: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 141: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 142: Blow molding machine repair/assembly, April 2, 1970
- Photograph 143: Blow molding machine repair/assembly, April 2, 1970
- Photograph 144: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 145: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 146: Blow molding machine repair/assembly, April 2, 1970
- Photograph 147: Blow molding machine repair/assembly, April 2, 1970
- Photograph 148: Blow molding machine repair/assembly, April 2, 1970
- Photograph 149: Blow molding machine repair/assembly, April 2, 1970
- Photograph 150: Blow molding machine repair/assembly, April 2, 1970
- Photograph 151: Blow molding machine repair/assembly, April 2, 1970
- Photograph 152: Blow molding machine repair/assembly, April 2, 1970
- Photograph 153: Blow molding machine repair/assembly, April 2, 1970
- Photograph 154: Blow molding machine repair/assembly, April 2, 1970
- Photograph 155: Blow molding machine repair/assembly, April 2, 1970
- Photograph 156: Blow molding machine repair/assembly, April 2, 1970
- Photograph 157: Blow molding machine repair/assembly, April 2, 1970
- Photograph 158: Blow molding machine repair/assembly and one unidentified man, April 2, 1970
- Photograph 159: Blow molding machine repair/assembly and one unidentified man, undated
- Photograph 160: Partially assembled GT/60 production model in foreground with GT/120 prototype in background, undated
- Photograph 161: Blow molding machine repair/assembly and two unidentified men, undated
- Photograph 162: Blow molding machine repair/assembly, undated
- Photograph 163: Blow molding machine repair/assembly, undated
- Photograph 164: Blow molding machine repair/assembly, undated
- Photograph 165: Blow molding machine repair/assembly, undated
- Photograph 166: Blow molding machine repair/assembly and two unidentified men, undated
- Photograph 167: Blow molding machine repair/assembly and three unidentified men, undated
- Photograph 168: Blow molding machine being pulled with a forklift and two unidentified men, undated
- Sub-Series 8: Blow Molding Machine Parts
- Photograph 169: Probably blow molding machine parts, February 1967
- Photograph 170: Probably blow molding machine part, February 1967
- Photograph 171: Rotating head with five core rods and neck ring collet assembly, 1969
- Photograph 172: Typical bench test (25# pre-load) of a portion of the tooling, May 26, 1969
- Photograph 173: Platens clamp, September 25, 1969
- Photograph 174: Probably blow molding parts, January 16, 1970
- Photograph 175: Probably blow molding part, January 30, 1970
- Photograph 176: Probably blow molding part, January 30, 1970
- Photograph 177: Probably blow molding part, January 30, 1970
- Photograph 178: Probably blow molding parts, January 30, 1970
- Photograph 179: Probably blow molding part, January 30, 1970
- Photograph 180: Probably blow molding parts, January 30, 1970
- Photograph 181: Probably blow molding part, January 30, 1970
- Photograph 182: Tie-rod cross beam, March 8, 1971
- Photograph 183: Reciprocating clamp for Giltech-100, 1979
- Photograph 184: Probably blow molding machine parts, undated
- Photograph 185: Probably blow molding machine parts, undated
- Photograph 186: 1 1/4" diameter camroll bearing, undated
- Photograph 187: Probably blow molding machine parts sitting on a sketch of most likely a blow molding machine, undated
- Photograph 188: Probably blow molding machine parts sitting on a sketch of most likely a blow molding machine, undated
- Photograph 189: Probably blow molding machine parts sitting on a sketch of most likely a blow molding machine, undated
- Photograph 190: Probably blow molding machine parts sitting on a sketch of most likely a blow molding machine, undated
- Photograph 191: Probably blow molding machine parts sitting on a sketch of most likely a blow molding machine, undated
- Photograph 192: Probably blow molding machine parts sitting on a sketch of most likely a blow molding machine, undated
- Photograph 193: Probably blow molding machine parts, undated
- Photograph 194: Probably blow molding machine parts, undated
- Photograph 195: Probably blow molding machine parts, undated
- Photograph 196: Probably blow molding machine parts, undated
- Photograph 197: Probably blow molding machine parts, undated
- Photograph 198: Probably blow molding machine parts, undated
- Photograph 199: Probably blow molding machine parts, undated
- Photograph 200: Probably blow molding machine parts, undated
- Photograph 201: Probably blow molding machine parts, undated
- Sub-Series 9: Bufferin and Excederin Bottle Designs, Bristol-Myers Products Division
- Sub-Series 10: Flexible Circuitry
- Sub-Series 11: Plastic Netting Machine Company
- Sub-Series 12: Ice Cream Dispenser
- Photograph 212: Probably an ice cream dispenser, Model JPS, Nov. 1978
- Photograph 213: Probably an ice cream dispenser, undated
- Photograph 214: Probably an ice cream dispenser, undated
- Photograph 215: Ice cream dispenser, undated
- Photograph 216: Ice cream dispenser, undated
- Photograph 217: Ice cream dispenser, undated
- Photograph 218: Ice cream dispenser, Model PGM base feeder, January 24, 1980
- Photograph 219: Ice cream dispenser, Model PGM base feeder, January 24, 1980
- Photograph 220: Ice cream dispenser, Model PGM base feeder, January 24, 1980
- Photograph 221: Ice cream dispenser, undated
- Photograph 222: Ice cream dispenser, undated
- Sub-Series 13: SAURCS
- Photograph 223: SAURCS machine repair/assembly, Oct. 1993
- Photograph 224: SAURCS machine repair/assembly, Nov. 1993
- Photograph 225: SAURCS machine repair/assembly and two unidentified men, 1994
- Photograph 226: SAURCS machine repair/assembly, 1994
- Photograph 227: SAURCS machine repair/assembly, 1994
- Photograph 228: SAURCS machine repair/assembly, 1994
- Photograph 229: Close-up view of SAURCS roll, 1994
- Photograph 230: Close-up view of SAURCS roll, 1994
- Photograph 231: SAURCS coating machine, 1994
- Sub-Series 14: Miscellaneous
- Photograph 232: Addition to the north wing of the Gilmore T. Schjeldahl Company office building in Northfield MN; one truck, one van, and one unidentified man, circa 1960
- Photograph 233: Rear view of completion of north wing addition to Gilmore T. Schjeldahl Company office building, circa 1960
- Photograph 234: Gilmore T. Schjeldahl telephone switching gear, 1963
- Photograph 235: Typical Mega-bar 180 degree wrap part from MEGA System Design LTD, Scarborough, Ontario, undated
- Photograph 236: Unknown photo, undated
- Series 6: Films
- Separated and placed with the other films in the Manuscript Vault.
- Film 1653: Three Gilmore T. Schjeldahl Company projects (1961): Polaris Missile Program; Air Domes; Echo II
- Film 1654: High-speed movie analysis of bottle discharge system in Giltech-100 machine 1969
- Film 1655: Wells Blue Bunny analysis by G. T. Schjeldahl and J. Ostrum (probably concerning ice cream filling machines), April 24, 1976
- Film 1656: Schjeldahl family, 1961 and May 1962, and footage of their trip in a mobile home to Washington State, undated
Browse by Series:
[Series 1: Sheldahl, Inc.: General Business Records],
[Series 2: Sheldahl, Inc.: Designs, Patents, and Products],
[Series 3: G.T. Schjeldahl's Other Companies],
[Series 4: G.T. Schjeldahl, Personal],
[Series 5: Photographs],
[Series 6: Films],
[All]